CN

D/S Reflective Aluminum Foil Insulation DFM-101A

Radiant Barriers and Reflective Insulation Systems

Double side insulation systems, as Radiant barriers and Reflective insulation work by reflecting radiant heat. D/S Reflective Aluminum foil Radiant barriers are installed outside the Glass wool, Rock wool, mineral wool, foam insulation materials.Double Sided Aluminum Foil Insulation is excellent as radiant barriers, flame retardant and vapor barriers can reduce energy loss costs 5% to 10%.

  • D/S Reflective Aluminum Foil Insulation Introduction

A light duty, Eco grade D/S Foil Insulation. Double Sided Aluminum Foil Insulation is made from 1 outer layers of pure aluminum foil and 1 outer layer of metallized polyester film as well as 1 layer recycled Kraft paper. These layers are bonded together with polyethylene and reinforced with 3-way fiberglass scrim. Double Sided Aluminum Foil Insulation is ideally used as sarking and insulation under roofs, in walls behind cladding or under timber floors, for residential and commercial building. Combining with glass-wool /rockwool/ mineral wool/ foam insulation, it is excellent as a vapor barrier for air-conditioning ducts, pipes and vessels.

 

FACING COMPOSITION

Composition

Description

Value (English)

Value (Metric)

Foil

Aluminum

0.28 mil

7 micron

Reinforcing - MD

Fiberglass

 2/inch

 8/100mm

Reinforcing - MD

Fiberglass

3/inch

12/100mm

Adhesive

Polyethylene

 

 

Kraft

Natural

30.7Ibs/3000ft2

50gsm

Adhesive

Polyethylene

 

 

Foil

Aluminum

0.5mil

12.5 micron

 

TYPICAL PHYSICAL PROPERTIES

Physical properties

Test Method

Value (English)

Value (Metric)

Basis weight

Scale

20.5bs / 1000 ft2

100gsm

Permeance (WVTR)

ASTM E96,

Procedure A

0.02 perm

1.15 ng/N.s

Tensile Strength-MD

ASTM D828

41.0 lbs / In

180 N/25mm

Tensile Strength-XD

ASTM D828

18.2lbs / In

80 N/25mm

Burst Strength

ASTM D774

65psi

45 N/cm2

Low temperature

Resistance

ASTM D1790

4 hrs @

-40℉ (-40℃)

Remains Flexible

No Delamination

Remains Flexible

No Delamination

High temperature

Resistance

ASTM D1790

4 hrs @

+240℉ (+116℃)

Remains Flexible

No Delamination

Remains Flexible

No Delamination

Emissivity

ASTM E408

0.03

0.03

 

Available Roll Width: 1.25m

Remarks

1.The data above are typical values only, and should not be used for specifications purpose.
2.Tolerance: Weight and Thickness: ±10%;Width:±3mm; Length: Log Roll: ±0.3m, Jumbo Roll: ±0.5%.
3.The products should be stored at room temperature, kept away from wet and heat source.
4.The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.

RELATED NEWS

Contact Us

If you would like to purchase the product, please contact dytape@aliyun.com or leave your contact details and we will get in touch with you shortly.