HVAC duct sealing tape feature extreme performance adhesives formulated to work in a wide range of cold and hot temperatures. HVAC duct tape is a waterproof solution that bonds to both flexible and rigid materials, meeting the needs of the professional contractor and homeowner alike. The chrome appearance also blends easily with ducting, air vents and other forced air components that need additional metal foil seals.
HVAC duct sealing tape designed for HVAC installations and repairs, it is metalized duct tape. The aluminum foil tape thickness 25um normal Aluminum foil backing, coated with Acrylic adhesive, protected by an easy-release silicone paper liner.
HVAC duct sealing tape is most commonly used to exposed surfaces of Duct wrap, HVAC Ductwork, Exterior wall insulation, Metal building insulation, Pipeline insulation, Hot water tank insulation.
Array of uses, including general repair, sealing hot and cold air ducts, duct insulation systems, sealing aluminum, stainless and plastic seams / joints, temporary repair of metal surfaces, copper pipe fixing.
High-quality, high tensile strength HVAC duct tape coated with strong, cold-weather solvent acrylic adhesive set on a easy-release silicone paper liner to preserve the adhesive and provide ease of use.
The HVAC duct tape resists flame, moisture / vapor, UV degradation, odor, weather, some chemicals and smoke transmission. Good for both indoor and outdoor use. Chemically resistant, thermally conductive, heat and light reflective.
The HVAC duct tape provides a durable bond at low and high temperatures. Conformable backing and pressure sensitive adhesive means it will adhere properly to a variety of smooth and irregular surfaces.
PROPERTIES |
METRIC |
ENGLISH |
TEST METHOD |
Backing Thickness |
30Micron |
1.2Mil |
PSTC-133 / ASTM D 3652 |
Total Thickness |
70 Micron |
2.8 Mil |
PSTC-133 / ASTM D 3652 |
Adhesion to Steel |
20N/25mm |
72Oz./In. |
PSTC-101 / ASTM D 3330 |
Tensile Strength |
45 N/25mm |
10.2Lb/In |
PSTC-131 / ASTM D 3759 |
Elongation |
3.0% |
3.0% |
PSTC-131 / ASTM D 3759 |
Service Temperature |
-30℃ to +150℃ |
-22℉ to +302℉ |
|
Applying Temperature |
-10℃ to +40℃ |
+50℉ to +105℉ |
|
Finish Roll:
50mm x 50m | 2” x 55yds |
75mm x 50m | 3” x 55yds |
Log Roll: | 1020mm x 50m |
Jumbo Roll: | 1020mm x 3000m |