FSFoil scrim backing

A-Acrylic adhesive

50-Backing thickness 50um

90-Tape thickness 90um

Reinforced aluminum tape backing is glass fiber reinforced aluminum film coated with water-based acrylic adhesive and protected by a silicone paper liner.

The Foil-scrim backing is 18um Aluminum foil laminated with the 2-way scrim 5x5mm. The scrim formed by a set of fiberglass yarns, in a transverse arrangement, where these are spaced from each other at a distance of 5mm.

TYPICAL APPLICATIONS:

  • Foil scrim tape applied for the coating and insulation in the air conditioning and ventilation sector.
  • General patching, sealing and fastening applications.
  • Union of fiberglass sheets or duct joints.
  • Insulation sealing of cold rooms.
  • Recommend use as sheet metal duct water vapor seal.
  • Rigid insulation of closing air ducts.

FEATURES:

  • Excellent level of adhesion and performance at higher temperatures.
  • High-strength foil-scrim laminate backing resists tearing.
  • High quality adhesive capable of bonding on a wide variety of substrates in cold climates.
  • High-tack synthetic rubber adhesive forms an instant bond.
  • Vapor barrier, reflecting heat, reflecting light, and UV-resistant design.

TYPICAL PHYSICAL PROPERTIES:

PROPERTIES

METRIC

ENGLISH

TEST METHOD

Backing Thickness

50Micron

2.0Mil

PSTC-133 / ASTM D 3652

Total Thickness

90 Micron

3.6Mil

PSTC-133 / ASTM D 3652

Adhesion to Steel

15N/25mm

52.5 Oz./In.

PSTC-101 / ASTM D 3330

Tack Rolling Ball

20cm

8.0In.

PSTC-6 / ASTM D 3121

Tensile Strength

120 N/25mm

27.3Lb/In

PSTC-131 / ASTM D 3759

Elongation

3.0%

3.0%

PSTC-131 / ASTM D 3759

Service Temperature

-30℃ to +80℃

-22℉ to +176℉

 

Applying Temperature

+10℃ to +40℃

+50℉ to +105℉

 

ROLL SIZE:

Finish Roll:  

50mm x 50m 2” x 55yds
75mm x 50m 3” x 55yds

Log Roll: 1200mm x 50m                

Jumbo Roll:1200mm x 900m