CN

HVAC Aluminum Foil Tape AFA4080SW

Thickness 40um normal Aluminum foil backing, coated with Acrylic adhesive, protected by an easy-release silicone paper liner.

Self Wound Aluminum Foil Tapes without scrim reinforced backing is a commercial grade foil tape. Suitable for sealing joints and seams of foil-faced insulation materials.

  • HVAC Aluminum Foil Tape Introduction

AF-Alum. Foil backing

A-Acrylic adhesive

40-Backing thickness40um

80-Tape thickness80um

SW-Self-wound, without release paper liner

 

Self-Wound Roll – A roll of tape in which each layer of tape is directly on top of the last one.  The roll contains no liner. The self wound Aluminium Foil Tape is a bright, soft temper aluminium foil, with a pressure sensitive adhesive. Foil is treated on one side with silicone for easy release on unwind.

AFA Series HVAC aluminum foil tape are single-faced adhesive tape of Aluminum Foil backing which is coated by Solvent Acrylic adhesive (PSA).Self Wound Aluminum Foil Tapes is industrially manufactured, and thus can be manipulated based on the selection of the monomers used in the formulation.

Self Wound Aluminum Foil Tapes will be offer good tack and adhesion to width range of temperature (from -30 degrees to 150 degrees ).

Acrylic adhesive HVAC Tape will be good aging stability, high resistance to UV, ozone and humidity, best useful in long-term, outdoor applications.

 

FEATURES

Aluminum backing provides excellent reflection of both heat and light.

High quality adhesive with super strong adhesion and holding power offers reliable and durable Foil-Scrim-Kraft Facing joints and seams sealing in HVAC ductwork application.

Low moisture vapor transmission rate makes AFA4080 an excellent vapor barrier.

Service Temperature range from -30℃ to +150℃.

 

TYPICAL PHYSICAL PROPERTIES

PROPERTIES

METRIC

ENGLISH

TEST METHOD

Backing Thickness

40Micron

1.6Mil

PSTC-133 / ASTM D 3652

Total Thickness

80 Micron

3.2Mil

PSTC-133 / ASTM D 3652

Adhesion to Steel

12N/25mm

43.2Oz./In.

PSTC-101 / ASTM D 3330

Tensile Strength

55 N/25mm

12.5Lb/In

PSTC-131 / ASTM D 3759

Elongation

3.0%

3.0%

PSTC-131 / ASTM D 3759

Service Temperature

-30℃ to +150℃

-22℉ to +302℉

 

Applying Temperature

-10℃ to +40℃

+50℉ to +105℉

 

 

TYPICAL APPLICATIONS:

AFA Series Acrylic adhesive HVAC Tape is most commonly used to exposed surfaces of Duct wrap, HVAC Ductwork, Exterior wall insulation, Metal building insulation, Pipeline insulation, Hot water tank insulation.

 

ROLL SIZE:

Finish Roll:  

50mm x 50m     2” x 55yds

75mm x 50m     3” x 55yds

Log Roll:   1020mm x 50m                

Jumbo Roll: 1020mm x 3000m

If you would like to purchase HVAC Foil Tape, please contact dytape@aliyun.com or leave your contact details and we will get in touch with you shortly.

Related News