AF-Alum. Foil backing

A-Acrylic adhesive

36-Backing thickness36um

78-Tape thickness78um

W-White Lacquered backing surface

AFA Series HVAC aluminum foil tapes are single-faced adhesive tape of Aluminum Foil backing which is coated by Solvent Acrylic adhesive (PSA). It is industrially manufactured, and thus can be manipulated based on the selection of the monomers used in the formulation.

White Lacquered Aluminum Foil Tape will be offer good tack and adhesion to width range of temperature (from -30 degrees to 150 degrees ).

White Lacquered Aluminum Foil Tape will be good aging stability, high resistance to UV, ozone and humidity, best useful in long-term, outdoor applications.

TYPICAL APPLICATIONS:

HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; joining and sealing flexible air duct seams and connections. May also be used for other industrial uses requiring a tape with these characteristics and benefits.

FEATURES:

White lacquered aluminum foil, match the White FSK Faced Ductwork and Pipe insulation.

Matte white finish does not reflect light.

Good aging resistance both indoors and outdoors.

Low moisture vapor transmission rate offers excellent sealing and patching performance.

TYPICAL PHYSICAL PROPERTIES:

PROPERTIES

METRIC

ENGLISH

TEST METHOD

White coating

2.5 Micron

0.1Mil

PSTC-133 / ASTM D 3652

Backing Thickness

36Micron

1.4Mil

PSTC-133 / ASTM D 3652

Total Thickness

78Micron

3.12Mil

PSTC-133 / ASTM D 3652

Adhesion to Steel

15N/25mm

54Oz./In.

PSTC-101 / ASTM D 3330

Tack Rolling ball

20cm

8.0In

PSTC-6 / ASTM D 3121

Tensile Strength

50 N/25mm

11.4Lb/In

PSTC-131 / ASTM D 3759

Elongation

3.0%

3.0%

PSTC-131 / ASTM D 3759

Service Temperature

-30℃ to +120℃

-22℉ to +248℉

 

Applying Temperature

-10℃ to +40℃

+50℉ to +105℉

 

ROLL SIZE:

Finish Roll:  

50mm x 50m 2” x 55yds
75mm x 50m 3” x 55yds
Log Roll: 1020mm x 50m
Jumbo Roll: 1020mm x 3000m