Marine Aluminum Foil Tape is made by combining a layer of aluminum foil with a high-strength adhesive backing. The tape is ideal for joining engine room sound proofing boards together and covering slight gaps between the boards. Designed to be easily cleaned form oil and engine dirt build up the shiny foil finish is wipe clean.
Marine aluminum foil tape is resistant against heat, cold, and humidity. For bonding of aluminum laminated mineral fiber insulation, pipes, and air ducts, for isolating against heat and cold, and for the sealing of containers and pipes during welding under protective gas. The tape is typically used for sealing and securing various components on boats, ships, or other marine vessels.
Marine aluminum foil tape is self-wound aluminum foil tape with a excellent adhesion, highly shear resistant, without released paper liner. The reflective aluminum foil backing with tht aluminum foil tape increases over time and will not decrease with advanced age. The ideal combination of the aluminum backing and Arcylic adhesive which is optimized for the demands of bonding insulating material, guarantees the best adhesion and highest security for critical conditions.
Sealing seams and joints: Marine foil tape can be used to seal seams and joints in boats, ships, and other marine vessels.
Repairing leaks: Marine foil tape can be used to repair leaks in boats, ships, and other marine vessels.
Insulating electrical components: Marine foil tape can be used to insulate electrical components from water, salt, and other harsh conditions.
Protecting surfaces from corrosion: Marine aluminum foil tape can be used to protect surfaces from corrosion.
PROPERTIES |
METRIC |
ENGLISH |
TEST METHOD |
Backing Thickness |
30Micron |
1.2Mil |
PSTC-133 / ASTM D 3652 |
Total Thickness |
70 Micron |
2.8 Mil |
PSTC-133 / ASTM D 3652 |
Adhesion to Steel |
12N/25mm |
43.2Oz./In. |
PSTC-101 / ASTM D 3330 |
Tensile Strength |
45 N/25mm |
10.2Lb/In |
PSTC-131 / ASTM D 3759 |
Elongation |
3.0% |
3.0% |
PSTC-131 / ASTM D 3759 |
Service Temperature |
-30℃ to +150℃ |
-22℉ to +302℉ |
|
Applying Temperature |
-10℃ to +40℃ |
+50℉ to +105℉ |
|
Finish Roll:
50mm x 50m | 2” x 55yds |
75mm x 50m | 3” x 55yds |
Log Roll: | 1020mm x 50m |
Jumbo Roll: | 1020mm x 3000m |