Matte black aluminum foil tape is a type of adhesive tape made from a thin layer of aluminum foil coated with a matte black finish. It is durable, waterproof, heat-resistant, easy to apply and remove. 25 micron (1.0mil) matte black aluminum foil, combined with a high performance solvent acrylic adhesive, protected by an easy-release silicone release paper.
Matte black aluminum foil tape will be good aging stability, high resistance to UV, ozone and humidity, best useful in long-term, outdoor applications. Matte black aluminum foil tape will be offer good tack and adhesion to width range of temperature (from -30 degrees to 150 degrees). The tape’s aluminum foil backing provides excellent heat and light reflection and can withstand temperatures up to 300 degrees Fahrenheit, while the matte black finish helps to reduce glare and provide a sleek appearance. This type of tape is often preferred over traditional silver aluminum foil tape when aesthetics are a concern.
Blocking light and reflections: The matte black finish of the tape helps to reduce light reflection and glare, which can be useful for applications such as stage lighting and photography.
Sealing and patching: The tape can be used to seal and patch holes, cracks, and gaps in a variety of materials, including metal, plastic, and glass.
Heat insulation: The aluminum foil in the tape helps to reflect heat, which can be useful for applications such as insulating pipes and ducts.
Black lacquered aluminum foil, match the Black FSK Faced Ductwork and Pipe insulation.
Matte black finish does not reflect light.
Good aging resistance both indoors and outdoors.
Low moisture vapor transmission rate offers excellent sealing and patching performance.
PROPERTIES |
METRIC |
ENGLISH |
TEST METHOD |
Black coating |
2.5 Micron |
0.1Mil |
PSTC-133 / ASTM D 3652 |
Backing Thickness |
25 Micron |
1.0Mil |
PSTC-133 / ASTM D 3652 |
Total Thickness |
62.5Micron |
2.5Mil |
PSTC-133 / ASTM D 3652 |
Adhesion to Steel |
15N/25mm |
54Oz./In. |
PSTC-101 / ASTM D 3330 |
Tack Rolling ball |
20cm |
8.0In |
PSTC-6 / ASTM D 3121 |
Tensile Strength |
40 N/25mm |
9.1Lb/In |
PSTC-131 / ASTM D 3759 |
Elongation |
3.0% |
3.0% |
PSTC-131 / ASTM D 3759 |
Service Temperature |
-30℃ to +120℃ |
-22℉ to +248℉ |
|
Applying Temperature |
-10℃ to +40℃ |
+50℉ to +105℉ |
|
Finish Roll:
50mm x 50m | 2” x 55yds |
75mm x 50m | 3” x 55yds |
Log Roll: | 1020mm x 50m |
Jumbo Roll: | 1020mm x 3000m |